How modular homes could help WA build more houses faster

WA’s population is growing quickly, but delivering homes across such a vast state can be difficult. Factory-built housing could help speed up the process.

23 November 2026

Key points

  • WA is working towards around 130,000 new homes by June 2029.
  • Prefab homes can be finished in eight to 12 weeks.
  •  55% of Australians are open to prefab or modular homes.

Last year Western Australia recorded the nation’s fastest population growth, with a rise of 2.2%. While there is plenty of land, with the state spanning more than 2.5 million kilometres, building new housing across such a vast region can be a challenge.

In residential construction, where trades, materials and equipment all need to reach the building site, those distances can add a layer of complexity to delivering new homes.

Rather than constructing every home entirely on-site, manufacturers such as Modular WA are bringing more of the process into controlled facilities before transporting completed homes to communities across the state.

Modular WA Managing Director Jason Sjoland said it was important to rethink how housing could be delivered across one of the world’s largest and most diverse jurisdictions.

“Western Australia presents unique challenges and opportunities. We’re designing homes for specific locations, climates and communities, then using modular construction methods to deliver them more efficiently. It’s about combining innovation with a deep understanding of where and how people want to live,” Sjoland said.

Modular WA Managing Director Jason Sjoland. Image supplied. Modular WA Managing Director Jason Sjoland. Image supplied.

The housing challenge

It’s one solution to a deep problem: we’re simply not building enough houses.

Under the National Housing Accord, Western Australia is working towards around 130,000 new homes by June 2029, equivalent to approximately 26,000 homes a year. In the year to the March quarter of 2026, 20,000 dwellings were completed, underlining the importance of expanding the ways homes are delivered.

Australia’s homes have traditionally been built site by site and trade by trade, vulnerable to weather and sequencing delays. Construction productivity has gone backwards, falling 12% over three decades according to the Productivity Commission, leading to stretched build times and higher costs.

Building homes offsite

Offsite construction turns the traditional approach upside down: work that ran in sequence on a site is done in parallel under factory conditions, quality checks sit inside the production line, and weather touches only site preparation and installation.

A prefab home can be finished in eight to 12 weeks, compared with 12 to 24 months for a conventional build.

But speed alone is not enough to convince home buyers. National research commissioned for the Home Front campaign found 55% of Australians are open to a prefab or modular home, drawn by faster builds and potentially lower costs.

That gap shows up in the numbers: prefab accounts for about 8% of construction in Australia, compared with roughly 80% in Sweden, according to prefabAUS Executive Chairman Damien Crough.

“The advantages of modern methods of construction become even more apparent when you’re building across large geographic areas,” Crough said.

A completed Modular WA home. Image supplied. A completed Modular WA home. Image supplied.

Making modular easier

Helping bridge that gap has become a focus for Commonwealth Bank, said CommBank Executive General Manager of Business Lending Grant Cairns.

“That’s particularly relevant in Western Australia, where the size of the state can make traditional construction more complex, with people, materials and equipment often travelling significant distances. Bringing more of the build process into a controlled manufacturing environment can help improve efficiency while still delivering homes designed for local conditions.”

The bank has worked on both sides of that equation, backing manufacturers to add productive capacity while supporting industry body prefabAUS on the contracts and lending settings that let retail customers choose a factory-built home with the same confidence they bring to a conventional one.

By combining local manufacturing, engineering and design expertise, Modular WA is helping deliver homes tailored to the unique conditions of communities across the state, from the Pilbara and Goldfields to the Wheatbelt and Great Southern.


This article is part of The Home Front series supported by Commonwealth Bank and was first published on news.com.au.

Newsroom

For the latest news and announcements from Commonwealth Bank.

Things you should know

This article is intended to provide general information only and has been prepared without considering an individual reader’s objectives, financial situation or needs. Readers should consider the appropriateness to their circumstances.

Media releases are prepared without considering an individual reader’s objectives, financial situation or needs. Readers should consider the appropriateness to their circumstances.

Visit Important Information to access Product Disclosure Statements or Terms and Conditions which are currently available electronically for products of the Commonwealth Bank Group, along with the relevant Financial Services Guide. Target Market Determinations are available here.

Loan applications are subject to credit approval. Interest rates are correct at the time they are published and are subject to change. Fees and charges may apply.